FTI GM CUSTOM CAMSHAFTS

Pricing for General Motors Camshafts is as follows:

$220.00 for GEN-1 Flat Tappet Grinds
$325.00 for GEN-1 Standard Core Hydraulic Roller Grinds
$375.00 for GEN-1 Standard Core Billet Solid/Hydraulic Roller Grinds
$450.00 for LS1-LS2-LS3-LS6-LS7 Billet Core Hydraulic Roller Grinds
$500.00 for LSx Single Bolt Billet Core Hydraulic Roller Grinds
$650.00 for LSx Billet Round Core Racing Solid/Hydraulic Roller Grinds

Our entire series of camshafts are designed for each customer's requirements.
Engineered for your particular engine, drivetrain, gearing and chassis combination.
Over 125 different roller and flat tappet lobe designs are available with even more currently in development!

These are not "one size fits all" camshaft profiles. Each one is engineered for "your" specific combination. That's what separates our customers from rest of the pack!

Contact us by EMAIL with all your information. Let us help you into the winner's circle.

Be prepared when you order your custom camshaft. Very specific engine and drivetrain information is required before the proper camshaft profile can be determined.

Use the form provided: CAMSHAFT TECH FORM

STREETBEAST Series Camshafts
Power Band: 1800 RPM to 6000 RPM
Our very popular "StreetBeast" series camshafts are designed for more of a street oriented combination that are looking for great low end torque and strong mid-range power with tame driving manners. Just a touch of an idle can be noted.

These profiles make great replacement cams with a lot more punch where you need it.

StreetSweeper-TQ Series Camshafts
Power Band: 2200 RPM to 6200 RPM
The "StreetSweeper-TQ" camshaft profiles can run on the street on a daily basis and still be extremely fast on the track. Usable power band is geared more for mid-range power and more on tap with the right peripherals.

These grinds are a step above the "StreetBeast" and add even more power to the already proven and potent "SB" profiles!

The "SS-TQ" series of camshafts do require higher pressure valve springs for best results.

"StreetSweeper-TQ" camshafts will allow your car to perform at its best on the track and still keep the neighbors appeased!

StreetSweeper-HT Series Camshafts
Power Band: 2500 RPM to 6500 RPM
The "StreetSweeper-HT" are the best overall dual purpose profiles for the LSx based combinations. They can run on the street with no issues in traffic and still be extremely fast on the race track. The power band is geared more for mid-range to higher RPM ranges with more on tap with light valvetrain.

The "SS-HT" grinds are a step above the "SS-TQ" profiles with more horsepower and a slightly higher RPM range. These camshafts do require matching valve springs and hardened push rods for best results.

All our customers have seen amazing results and you too will see the same results with these sticks!

StreetSweeper Series Camshafts
Power Band: 3000 RPM to 6800 RPM
This is the well talked about series of camshafts with proven results. The "StreetSweeper" family of lobes are stable and used in many high power combinations. All the "SS" camshaft profiles can run on the street and still be extremely fast on the track. The average power band is between 3000-6800 RPM with even more RPM available with super-light valvetrain.

These grinds are a step or two above the "StreetSweeper-HT" and add even more power to the already proven and potent "SS-HT" profiles!

These camshafts do require higher pressure valve springs, lightweight hardware and heavy wall push rods for best results. It is preferred for FTI to provide all the valvetrain for these grinds because of their usage.

This high power series of camshafts will shock your competition as you blow their doors off!

MAX-AIR Series Camshafts
Power band varies depending on application
The highly successful "MAX-AIR" series camshafts are for serious performance usage only. These are the camshaft designs the record holders and class Champions are using!

Top ten racers know what they need and these are the bullets they use!

These profiles require very light weight valvetrain pieces and a ton of rear gear ratio for best performance.

HELLFIRE & HELLRAISER Series Camshafts
Power Band: 3200 RPM to 7000+ RPM
Our most powerful series of "power-adder" grinds for the track but are reliable enough for street usage.

These camshaft profiles are the proven horsepower makers for supercharged and turbo applications. Power band between 3200-7000+ RPM and required severe duty valves and light valvetrain. This series of camshafts have produced many eight and nine second LSx street cars.

TOXIC & TOXIC-PLUS Series Camshafts
Power Band: 3500 RPM to 7500+ RPM
Our most powerful series of "race only" grinds are not recommended for street usage.

These camshaft profiles are the most radical designs available anywhere. Power band between 3500-7500+ RPM and more with light valvetrain. Ultra light-weight valvetrain components are required for best performance. These profiles should also run shaft type rocker arms for best results. This series of camshafts is not for the lighthearted enthusiast!