Loading... Please wait...

Our Newsletter


FTI LT1 GEN V Custom Hydraulic Roller Camshaft - Forced Induction

  • GM LT1 GEN V Custom Camshaft
  • GM LT1 GEN V DI Pump Lobe
  • GM LT1 GEN V DI Pump Lobe Choices
RRP:
$619.99
Your Price:
$569.99 (You save $50.00)
SKU:
FTI-LT1-HR-SC
Weight:
13.00 LBS
Shipping:
Calculated at checkout
Quantity:


Product Description

FTI Custom Hydraulic Roller Camshaft - LT1 GEN-V (Forced Induction)

These revolutionary Comp Cams based GM GEN V camshafts are designed to work with the direct injection, VVT and AFM lifters featured in GM's GEN V LT1-L83-L86 engine. These forced induction grinds feature many proprietary lobe profiles to optimize the power and reliability for forced induction combinations.

The "Street/Strip" series LT1/LT4 camshafts increase torque and horsepower throughout the entire rpm range while providing excellent responsiveness and mid-range power over stock for across the board horsepower and torque gains. The GM LT1 GEN V camshafts do require the Comp Cams phaser limiter kit #5456 (sold separately), which limits the range of camshaft movement from 62 to 22 crank degrees, thus requiring custom PCM tuning. High pressure, replacement valve springs are required as well as the correct length, hardened push rods.

The "Race/Track" series LT1 hydraulic roller custom camshaft profiles are designed per each customer's specific application. Every single facet of your project is taken into consideration when developing these camshaft profiles. Drag racing, open track and high endurance applications are covered. The "R/T" series camshafts require the AFM to be deactivated and non-AFM lifters to be used. Standard Morel link-bar or direct replacement LS2 lifters and trays are required. Comp Cams phaser limiter kit #5456 required. (sold separately)

Comp Cams tool steel cam core technology, widely seen in NASCAR, NHRA and other professional race engines, is now available for GM Gen V LT1, L83 and L86 applications. Tool steel is 30% stronger than the standard SAE 5150 or SAE 8620 cam cores typically used for LS camshafts. This material allows the use of more aggressive profiles on both the direct injection (DI) fuel pump lobe and the cam lobes. The size and shape of the DI lobe can be customized to support more horsepower over the OEM design (see fuel pump lobe options). The polygonal designs are available with three, four or five “throws” per revolution. The four-lobe option can be advanced or retarded to properly phase with the injector timing to maximize flow, reduce pressure fluctuations and minimize fuel bypass.

These Comp Cams tool steel cam cores are through hardened, meaning that engine builders can choose virtually any combination of duration, lift, lobe separation and advance. They are superior to the traditional hardened surface of either induction-hardened or carburized steel cam cores. GM Gen V (LT1/L83/L86) Sportsman Tool Steel Camshafts are available with or without Active Fuel Management (AFM). Contact us for assistance in selecting the right tool steel cam for your application. Like with any VVT application, custom tuning is required.

Completion of the CAM TECH form required.

These brand new LT1 grinds will not work with factory computers without modifications and tuning.

Due to the nature of these aggressive "R/T" series hydraulic roller camshaft designs, choosing the proper valve spring package and other valvetrain peripherals is critical for the success of your project. For recommendations and ordering information, please include all the details in your Tech Form so it can all be quoted for you.

CAMSHAFT DETAILS:

  • Duration @ .020" Tappet Lift Range: 239* through 289*
  • Duration @ .050" Tappet Lift Range: 219* through 259*
  • Gross Valve Lift Range: .600" to .650"+ (1.8:1 ratio)
  • Lobe Separation Range: 115* through 125*+ available
  • RPM Range: From off idle to whatever your cylinder heads can handle
  • Premium quality "Tool Steel" billet camshaft core with multiple fuel pump cams
  • Requires Cam Phaser/Limiter (#5456) and custom PCM tuning

PART NUMBER: FTI-CUSTOM-HR-LT1-SC

flowtech3.jpg

14-c7-red-corvette-02.jpg


Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the FTI LT1 GEN V Custom Hydraulic Roller Camshaft - Forced Induction to your wish list.

You Recently Viewed...