Loading... Please wait...

Our Newsletter

HEMI XFI Series Hydraulic Roller Camshafts

  • Image 1
13.00 LBS
Calculated at checkout

Product Description

Comp Cams XFI™ Series HEMI Camshafts

New XFI™ Camshafts Deliver Big Power Increases For Late-Model Chrysler Hemi 5.7 and 6.1-Liter Engines

Three different camshaft combinations net power increases up to 61 HP

Click For High Resolution ImageCOMP Cams® New XFI™ (Xtreme Fuel Injection) camshafts for HEMI powered Chrysler vehicles dramatically increase engine horsepower and torque, yet retain compatibility with reprogrammed OEM vehicle computer systems. Available in three different profiles (XFI 260, 268 and 273); the new camshafts are application-specific with designs for street performance and towing.

In recent dyno tests on a Hemi engine using COMP’s #26918 beehive valve springs and upgraded exhaust, the XFI 260 netted 20 additional ft pounds of torque in lower rpm ranges with a peak of 31 additional hp. The XE 268 camshaft added 14 ft lbs of torque at low rpm and 47 additional peak horsepower. The amazing COMP Cams® XFI 273 camshaft yielded it’s most significant horsepower increases over 4500 rpm generating 61 more horsepower than the stock Hemi 5.7-liter engine.

“We’re extremely pleased with the power gains we have achieved with these camshafts,” said Scooter Brothers, VP of Engineering. “When we set out to offer specialized Hemi camshafts, we had an acceptable power increase figure in mind. We have far exceeded that original target figure and believe that these three camshafts will offer customers the ability to find the exact camshaft that is right for their vehicle, car or truck.




Xtreme Fuel Injection (XFI™) Hydraulic Roller Camshaft 

SPECS: 208*-212*-113* .522" - .525" 

Noticeable idle 

Moderate tuning modifications required 

RPM RANGE: 1000 to 5500 

Strong low-end and midrange power 

Can use stock computer 

Requires aftermarket valve springs 

PART NUMBER: COMP-112-500-11




Xtreme Fuel Injection (XFI™) Hydraulic Roller Camshaft

SPECS: 216*-220*-113* .545" - .548"

Noticeable idle

Moderate tuning modifications required

RPM RANGE: 1500 to 5800

Strong midrange power

Needs aftermarket programmer

Requires aftermarket valve springs

PART NUMBER: COMP-112-501-11




Xtreme Fuel Injection (XFI™) Hydraulic Roller Camshaft

SPECS: 224*-228*-114* .564" - .571"

Very noticeable idle

Professional tuning modifications required

RPM RANGE: 2200 to 6200+

Strong midrange and top end power

Requires tuning of the ECM. Needs aftermarket programmer.

Requires aftermarket valve springs

Needs extended rev limit and better exhaust

PART NUMBER: COMP-112-502-11


* You must specify part number when ordering *





Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the HEMI XFI Series Hydraulic Roller Camshafts to your wish list.

You Recently Viewed...