Melling Select SB Ford 351 Windsor Oil Pump - Race Ported
This performance line of Melling Oil Pumps has a larger inlet hole and hardened steel gears. The gears are longer to supply additional oil flow for wider bearing clearances. The driveshaft and idler shaft have been extended into the cover to provide extra support and eliminate any shaft deflection. All passages have casting flash removed, corners radiused, polished and blended by hand. Housings and gears are vibratory polished to reduce wear and cavitation. The pump gears are prepared and sprayed with moly-based coating to reduce friction & loss of flow. All critical clearances are checked on reassembly. The pressure relief valve is deburred insure smooth operation, cleaned and re-installed with the existing spring & new hardware. The pressure relief spring plug is threaded for easy replacement. Each cover plate is vibratory deburred, cleaned and fastened to main housing with safety-wired aircraft bolts. This race pump features a 460 style center gear and cover plate which provides support at both ends of the gear for extra strength for high RPM applications. Pump is bench tested.
PART NUMBER: MEL-10832-RACE
Posted by Spencer on 16th Dec 2015
Much better than the standard m83 pump. Worth the money to have it worked over and set up properly.
Posted by Gerry on 17th Aug 2013
Thanks for the recommendation. This pump cured all the valvetrain noises in my stroker. .