Morel High RPM Link-bar Hydraulic Roller Lifters - (PAIR)
These Morel racing lifters were developed for use with high RPM hydraulic roller camshaft profiles only. This lifter design offers a long list of important benefits over the standard "Street Roller". The internal hydraulics of factory roller lifters are susceptible to pumping up over 6500 RPM, causing horsepower robbing valve float along with the possibility of severe valvetrain damage.
If you're looking for the most dependable and best performing hydraulic roller lifter available, upgrade to the Morel HI-RPM hydraulic roller lifters and get the RPM capabilities* similar to a solid roller with the long, maintenance free life of a hydraulic roller.
These Morel HI-RPM lifters feature:
- Retro-fit design for non-roller blocks or factory upgrade for roller engines
- Drop in hydraulic roller lifters - no modifications to block required
- Captured link bar system ensures precise lifter movement without binding
- Morel's proprietary steel alloy lifter bodies - micro polished for reduced friction
- Revolutionary internal design supports high RPM stability
- Large .750" diameter roller lifter wheel dispenses load over a wider range
- The billet body design takes full advantage of aftermarket camshaft profiles
- Able to withstand higher spring pressures than competitors' units
- Secured link bar system pairs lifters together - ideal for race applications
- Do not use an oil viscosity heavier than 5W-40
* varies depending on camshaft lobe and valvetrain peripherals
THIS IS A SINGLE "PAIR" of LINK BAR LIFTERS
PART NUMBER: MRL-5878
